（IEC60335-1,GB4706.1-2005)
                                                         
                                                                     TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
Household and similar electrical appliances – General requirements
IEC60335-1/ 4. Edition :2001 + Am.1 :2004 + Am. 2:2006
R=Required by Lab
S=May be subcontracted
 
Clause Measurement/testing Testing / measuring equipment / material needed 
2 Normative References Access to copies of listed standards
4 General requirement None
5 General conditions for the tests None
6 Classification None
7 Marking and instructions  Spirit, Water 
8 Protection against access to live parts Test probe B, 13 and 41 of IEC61032, voltmeter mill ammeter, force gauges, 2000ohm non-inductive resister
9 Starting of motor-operated appliances None
10 Power input and current Voltmeter, ammeter, wattmeter 
11 Heating Temperature controlled room,Temperature Recorder, fine wire thermocouples, test corners,
Winding resistance measurement system, Loading as required by part 2's
12 Void  
13 Leakage current and electric strength at operating temperature Leakage current meter, isolation transformer, HV test supply, Network(Fig.4 of IEC60990) 
14 Transient overvoltage Inpulse voltage test generator and monitor
15 Moisture resistance Oscillating hoop IP test equipment, measurement beaker, spray nozzle
16 Leakage current and electric strength Environmental chamber capable of 93%RH at selected temp. with HV test facilities
17 Overload protection of transformers and associated circuits  Included above
18 Endurance As required by part 2's
19 Abnormal operation As above with suitable protection against damage to equipment, personnel and property in event of abnormal failure
Electrostatic discharge test apparatus (IEC 61000-4-2), Radiated field test apparatus (IEC 61000-4-3), Fast transient burst test apparatus (IEC 61000-4-4), Voltage surge test apparatus (IEC 61000-4-5), Injected current test apparatus (IEC 61000-4-6), Voltage dip and interruption test apparatus (IEC 61000-4-11), Mains signal test apparatus (IEC 61000-4-13)
20 Stability and mechanical hazards Inclined plains, masses, force gauges
21 Mechanical strength Impact hammer, Hardened steel pin, Force gauges
22 Construction Test rig for torque on pin supported appliance, Heating cabinet(70 ±2℃)
Test probe 11 of IEC61032,
Test fingernail
Force gauge, Test finger nail
Oxygen bomb
Methylated spirits and Pressure appratus
Water pressure test apparatus
23 Internal wiring Flexing test apparatus
24 Components Laboratory may or may not have facilities for testing to component standards.
Certification by specialist laboratories is accepted for compliance
25 Supply connection and external flexible cords Flexing test apparatus, Cord anchorage force & torque tester
26 Terminals for external conductors Torque screwdriver
27 Provision for earthing Earth continuity tester, access to ISO2178 and 1463 testing
28 Screws and connections Torque gauge
29 Creepage distances, clearances and distance through insulation Mechanical measurement tools, Rod and ball gauges
 Proof tracking test apparatus
30 Resistance to heat and fire  Ball Pressure test apparatus, Glow wire & Needle flame test apparatus,
Apparatus for low power circuit determination.
Horizontal and vertical burning test apparatus
31 Resistance to rusting Part2 requirements
32 Radiation, toxicity and similar hazards Part2 requirements
Annex A Routine tests None
Annex B Appliances Powered by rechargeable batteries Free fall test apparatus (IEC60068-2-32)
Annex C Ageing Test on Motors Nothing special
Annex D Alternative requirements for protected motors Nothing special
Annex E Needle flame test Needle flame test apparatus (IEC 60695-2-2)
Annex F Capacitors Impulse voltage test apparatus, Endurance test apparatus (IEC 60384-14)
Annex G Safety isolating transformers Circuit for measuring leakage current Nothing special
Annex H Switches Endurance test apparatus (61058-1)
Annex I Motors having basic insulation that is inadequate for the rated voltage of the appliances Nothing special
Annex J Coated printed circuit boards Coated printed circuit boards test apparatus (IEC60664-3)
Annex K Overvoltage categories None
Annex L Guidance for the measurement of clearances and creepage distances None
Annex M Pollution degree None
Annex N Proof tracking test Proof tracking test apparatus (IEC 60112)
Annex O Selection and sequence of the test of clause 30 None
Annex P Guidance for the application of this standard to appliances used in warm damp equable climates None
Annex Q Sequence of tests for the evaluation of electronic circuits None
Annex R Software evaluation Capability for Soft ware evaluation (IEC 60730-1)

.5/3/4/6/8 27个/套规格 1.0至2.0(11个)和2.5-3.0至10.0(16个)